FitMec Engineers Twin Ferrule Tube Fittings consists of four precisely machine components for a 100% Reliable leak proof joint. The function of the back ferrules is to provide an excellent Mechanical and vibration hold on the Tube. The function of the Front Ferrule is to provide a pressure Seal between the tube and the body, silver plating on the Nuts ensures No Galling on body threads, FitMec Engineers Tube Fittings are designed to compensate for sufficient pull-up and allows repeated remake ability. These fittings are available for fractional and metric Tube with the choice of pipe threads, i.e. NPT, BSP/BSPT, ISO METRIC, SAE/MS.
FITMEC ENGINEERS Tube fittings are available in assembled and ready to use conditions to provide a reliable and leak-proof connection in instrument and process tubing systems. The installation of these Tube Fittings is very simple. Just insert the Tube Fittings Assembly and tighten the nut as per assembly instruction provide in this catalogue in section of Installation Instructions (1.1/4 turn form- tight) and the joint is ready to take any kind of pressures from low to high. The front ferrule, as it is urged forward against the tapered area of the body is forced inward gripping and subsequently sealing the leading edge tightly onto tubing.
Simultaneously the back. Ferrule , done tailed directly behind the front ferrule, swages beneath its trailing edge affording the desired “coining” action and mechanical connection of tubing and fitting. It is this interaction of ferrules that allows FITMEC ENGINEERS too achieves its excellent sealing capabilities under a wide variety of application variables.
FITMEC ENGINEERS TUBE FITTINGS are designed, manufactured and quality controlled to be totally “Interchangeable” with leading International brands. The exceptional infrastructure and quality standards that are followed at all stages of our products assure complete reliability of service whenever intermixed with other International brands.